Get a quote
for prototypes and serial production

Suitable construction plastic and a low-cost material at the same time. Can be dyed with MB to achieve the desired colour.

Suitable construction plastic and available with flame retardant if UL 94 requirements are met.

Very good construction plastic with high durability requirements and available with flame retardant if UL 94 requirements are met.

Very good chemical resistance and very suitable for the food industry and large items. PP can be added with talc and GF to achieve the desired mechanical properties.

Is a tough material with high tensile strength, elasticity and lustre. PA6 is highly resistant to abrasion and chemicals such as acids and alkalis. Is slightly hygroscopic, where the absorption of water acts as a plasticiser, making the item stronger and tougher.

Semi-crystalline thermoplastic that occurs both as homopolymer and copolymer. Good resilience and good wear and friction properties.

Enter the desired material at the end of the quote form under 'Technical info'. We have more than 2,000 different plastic materials in stock.

Surface in tool will be milled fine. Cheapest.

Matte surface, equivalent to a VDI 27

Matte surface, equivalent to a VDI 30.

Suitable for prototypes. Most expensive.

Elaborate under Technical info at the end of the form.

AlSi12(Fe) (a). For complicated shapes incl. thin wall thicknesses. Good corrosion resistance, and relatively good mechanical properties. Density: 2.7kg/dm3

AlSi9Cu3. Good alloy for all-round use, for complex shapes, and for relative thin wall thicknesses. Relatively good mechanical properties. Density: 2.7kg/dm3

AlSi12Cu1(Fe). For complicated shapes and relatively thin wall thicknesses. Relatively good corrosion resistance. Density: 2.7kg/dm3

AlSi7Mg0,3. For investment casting. Good strength properties. Density: 2.7kg/dm3

Density: 1,8kg/dm3

Good for items that require fine tolerances and smaller wall thicknesses. The material is durable and often used for fittings, hinges, etc. Density: 6,7kg/dm3

We can also cast in other alloys. Enter the desired material at the end of the quote form under 'Technical info'.

Suitable construction plastic and a low-cost material at the same time. Can be dyed with MB to achieve the desired colour.

Suitable construction plastic and available with flame retardant if UL 94 requirements are met.

Very good construction plastic with high durability requirements and available with flame retardant if UL 94 requirements are met.

Very good chemical resistance and very suitable for the food industry and large items. PP can be added with talc and GF to achieve the desired mechanical properties.

Is a tough material with high tensile strength, elasticity and lustre. PA6 is highly resistant to abrasion and chemicals such as acids and alkalis. Is slightly hygroscopic, where the absorption of water acts as a plasticiser, making the item stronger and tougher.

Semi-crystalline thermoplastic that occurs both as homopolymer and copolymer. Good resilience and good wear and friction properties.

Enter the desired material at the end of the quote form under 'Technical info'. We have more than 2,000 different plastic materials in stock.

Surface in tool will be milled fine. Cheapest.

Matte surface, equivalent to a VDI 27

Matte surface, equivalent to a VDI 30.

Suitable for prototypes. Most expensive.

Elaborate under Technical info at the end of the form.

AlSi12(Fe) (a). For complicated shapes incl. thin wall thicknesses. Good corrosion resistance, and relatively good mechanical properties. Density: 2.7kg/dm3

AlSi9Cu3. Good alloy for all-round use, for complex shapes, and for relative thin wall thicknesses. Relatively good mechanical properties. Density: 2.7kg/dm3

AlSi12Cu1(Fe). For complicated shapes and relatively thin wall thicknesses. Relatively good corrosion resistance. Density: 2.7kg/dm3

AlSi7Mg0,3. For investment casting. Good strength properties. Density: 2.7kg/dm3

Density: 1,8kg/dm3

Good for items that require fine tolerances and smaller wall thicknesses. The material is durable and often used for fittings, hinges, etc. Density: 6,7kg/dm3

We can also cast in other alloys. Enter the desired material at the end of the quote form under 'Technical info'.